+86-755-36991787
Fixed Long Range RFID Reader
video
Fixed Long Range RFID Reader

Fixed Long Range RFID Reader

AS9I05C integrates the antenna and the card reader&writer, convenient for installation and deployment. It can read the passive RFID tag of the EPC global Gen2 ISO/IEC 18000-6c protocol.
Send Inquiry
Product Details ofFixed Long Range RFID Reader

This UHF reader can be applied to various production line automation management, parking lot management system, personnel access control management system, fixed asset management system, warehousing logistics system, automatic weighing system, ect


Specification

Reading Distance

0-7 meters

Protocol

EPC C1 G2

Frequency

860-960MHZ

Antenna Polarization

Circular Polarization

Antenna Gain

5dBi

Data Interface

RJ45(Customizable:RS232、WG26)

IO Interface

Optional: Support 1 optocoupler input and 1 relay output

Power

DC24V/2A

Working Temperature

-30℃~70℃

Dimension

129mm×129mm×49mm

Weight

450g

Installation Method

Dedicated pole holder (the pole diameter is up to 50mm)


Product details:

long range rfid reader.jpg
rfid reader.jpg


Advantages:

Ultra-thin integration

This reader integrates the antenna and the card reader&writer, convenient for installation and deployment. It can read the passive RFID tag of the EPC protocol. Product size: 129mm×129mm×49mm. It is smaller in size, lighter in weight and more fashionable in appearance than similar products in the market.


Carrier Leakage Calibration Technology and Automatic Calibration Algorithm

With longer reading distance , Stronger data write performance and stronger multi-tag reading performance.


Outstanding RFID tag reading performance

Built-in 5dBi circularly polarized antenna, stable reading distance of 0-3 meters, the longest reading distance up to 9 meters.


Strong multi-tag reading ability

With advanced anti-collision algorithms and carrier leakage calibration technology, more than 100 tags can be read per second.


The reading distance can be adjusted

The output power of the reader can be adjusted by the configuration software, and the RFID tag reading distance can be quickly adjusted within the range of 0-7 meters, which greatly facilitates the adjustment requirements of the RFID tag reading distance on the construction site.


Powerful Network Performance

By configuring the network parameter, the reader can work in TCP/UDP client-server mode or TCP/UDP client mode. The network supports 10/100M Ethernet interface, integrating ARP, IP, ICMP, UDP, SOCK5, http and other protocols inside, supports dynamic IP and static IP, supports gateways and proxy servers.

The main functions of the network:

1)TCP/UDP Server/Client, the reader provides four ways to connect to the PC (TCP Server, UDP Server, TCP Client, UDP Client), the customer can choose one of the ways to connect the reader Connect to the PC.

2)DHCP (Dynamic Host Configuration Protocol) Client, this function enables the reader to obtain its IP Address through the DHCP Server (Gateway), and allocate IP addresses through the internal network Server to avoid IP address conflicts.

3)PPP Over Ethernet, PPPoE protocol enables the reader to connect to the ADSL Modem directly after dialing and connect to the Internet.

4)Dynamic DNS dynamic domain name system, through the built-in DNS function of the card reader, the user can obtain a fixed domain name and map it to any dynamic IP address, so that the monitoring terminal can be directly managed through the Internet. No fixed IP is required.

5)Automatically detect 10/100Mbps, the reader can detect the 10/100Mbps network environment automatically, without manual switching.

6) Built-in network management system, this function allows users to configure the network parameters of the reader through browsers such as IE, Netscaps, etc., without installing additional drivers and management software.


Shipping & After Service Support

Shipment: DHL, FedEx, UPS, and more.

Factory warranty: 2 full years


FAQ

1. Q: Does this UHF RFID reader has a light and sound indicator?

A: The product has a built-in buzzer, the buzzer will beep when reader power on. The buzzer will beep each time when a RFID tag is detect. The buzzer sound can be turned off via the DEMO software.


2. Q: Are you a factory, do you support OEM?

A: We are a factory in Shenzhen City, China, we support OEM.


3. Q: Can you print our company logo on this long range rfid reader?

A: Yes, we can custom the personal customized printing on this UHF reader.


4. Q: Do you provide SDK develop kit for this rfid reader and writer?

A: Yes, of course we will provide.


5. Q: What is the shipping time for 1-10 units?

A: About 3-5 days.


Hot Tags: fixed long range rfid reader, China fixed long range rfid reader suppliers, factory, Handheld NFC Reader, UHF RFID Reader Module Arduino, Mobile RFID Reader, RFID Barcode Reader, Handheld Mobile RFID Reader, Desktop RFID Writer

Next
No Information

Send Inquiry

(0/10)

clearall